How to operate high speed blown film machine correctly?

April 13 11:06:18, 2024

High-speed film blowing machine installation notes
When the film blowing machine is installed, care should be taken to adjust the center line of the extruder head and the center of the pulling roller to keep horizontal and vertical, and not to deviate from the skew. When winding up, gradually increase the outside diameter of the winding. Please pay attention to the cooperation between the pulling speed and the winding speed. Please adjust it in time. After the host is turned on, pay close attention to the operation of the host, timely adjust, correct, electrical instrument, controller to ensure its normal operation. Mainframe gearboxes and traction reduction gearboxes should be frequently refueled to replace gear oils. The new machine should be replaced with a new gear oil in about 10 days to ensure normal operation of the rotating parts. Pay attention to refueling to prevent jamming and overheating damage. Also check each one. The tightness of the connection prevents loosening of the bolt. The compressed air in the blister tube should be kept in proper quantity, because the compressed air will be leaked out during the traction process. Please add it in time.
First of all, regardless of the number of equipment, there must be two or more shifts per shift. This is related to the safety of production and should not be taken carelessly.
Films blown below 1200mm can be kept unchanged for 2 people per class in 3 machines (The principle is that the machine needs to be configured, and it is best to configure the feeders together). If there are six machines, each class can be configured with 3-4 individuals, it should be able to meet the needs of the specific look at their own row.
1. If the equipment is not heated, the heating temperature and time are less than the specified requirements, the extruder and rotating die must not be started, otherwise the equipment will be damaged.
2. When the raw material is unpacked, check whether there is wet material. The wet material must not be mixed. It must be dried after drying.
3, die and die mouth cleaning can only use copper to clean the die mouth, not scraping knife blade, iron scrape die mouth, otherwise it will cause die damage.

Black Wire

Black Wire: Black wire, also known as black annealed wire, is a type of wire that has undergone an annealing process to make it softer and more flexible. It is typically made from low carbon steel wire and has a black or dark gray appearance. Black wire is commonly used for tying, bundling, and securing purposes in construction, agriculture, and general applications. It is known for its malleability and ease of use.
Loop Tie Wire: Loop tie wire is a type of wire that is preformed into loops or ties for easy and efficient tying applications. It is often made from galvanized or black annealed wire. Loop tie wire is commonly used in construction, such as securing rebar, connecting WIRE MESH panels, and bundling construction materials. The preformed loops allow for quick installation and provide a secure and reliable connection.
Annealed Double Loop Tie Wire: Annealed double loop tie wire is a specific type of loop tie wire that has undergone an annealing process to make it softer and more pliable. It is typically made from black annealed wire. The double loop design consists of two preformed loops on opposite ends of the wire, allowing for easy and secure fastening. Annealed double loop tie wire is commonly used in construction, gardening, and other applications where quick and reliable tying is required.
Iron Binding Wire: Iron binding wire, also known as baling wire or tie wire, is a type of wire that is commonly used for binding, bundling, and securing various materials. It is typically made from galvanized or black annealed wire. Iron binding wire is widely used in construction, agriculture, packaging, and other industries. It provides strength, durability, and flexibility for applications such as securing packages, tying rebar, and fastening materials together.
These different types of wires, including black wire, loop tie wire, annealed double loop tie wire, and iron binding wire, offer solutions for various tying, bundling, and securing needs. The specific choice depends on factors such as the application, required strength, flexibility, and desired appearance.

Black Wire,Loop Tie Wire,Annealed Double Loop Tie Wire,Iron Binding Wire

Hebei Aibuer trading co., Ltd , https://www.ablewiremesh.com