Waterproof when doing the best waterproof how to do it will not leak

Bathroom waterproofing Everybody knows that it belongs to a very important item in the decoration. If the waterproofing is not done, then during the later period of use, it may lead to water leakage, water seepage, etc., which brings people various annoyances and repairs. kind of hard. The following Xiao Bian will introduce you to the best when waterproof and how to do waterproofing will not leak.

When does waterproofing do the best

When waterproof is best, normally it is after the completion of the transformation of the hydropower pipeline. Then we must clean up the ground. We can start to deal with those wastes, and we must pay attention to the details when brushing and waterproofing. For example, the place like the mouth of the pipeline is to brush several times. When you brush the second part, you must wait until you finish the second one. After the brushing, the water can be drained. The test time is to check whether there is any seepage and leakage of water downstairs after 48H. To know that this project seems to be relatively simple, it must be sloppy in the construction process and it must be tested. Do not leak water before coming to the next step.

How to prevent water from leaking

The first step is to do a good job at the grassroots level.

First of all, when constructing, it is necessary to first deal with the garbage or reinforced concrete heads and nails on the wall surface. These must be cleaned, and only after the clean-up can ensure that the waterproof and grass-roots layers have a better viscosity.

The second step, waterproof construction operations.

1, for some places where there is hydroelectric slotting, here to remind must brush waterproof coating, and at the same time like the bathroom pipe and the corner of the wall remember to use the plugging king to approve the brush Caixing, can be said that many Workers are also the most forgotten places during construction.

2, if it is a large area of ​​brush waterproof coating, hereby suggest that you better use the vertical and horizontal brushing brushing method will be better, it can be said to do so is to make each layer of waterproof coating between the more bonding, And you can also do it by adding missing points to each other so that you don’t have any bottomlessness or omissions.

The third step, closed water test.

After you've brushed it all up, this time it's time to check if your waterproof construction is in the end. Then you need to start a water shut-off test for 48 hours.

After the bathroom is done, it must be done before it can be used as a water-retaining test. The floor waterproofing is probably about 30 cm. After about 48 hours, you can check if the ceiling of the building is leaking. If not, then you can boldly proceed with the next phase of construction. If there is a problem, then you must do it again. It is essential that you do not have leakage to make the next phase.

Summary: When it comes to waterproofing, what should be done best and waterproofing? How to do it without leaking? Related content is introduced here. Waterproofing is a very important project in decoration. Therefore, when waterproofing is done, it must not be sloppy. It must be waterproof. There is no leakage of water before the next stage of renovation can be carried out.

CH-80/100/200 Hydraulic Hole Punching Tool

CH-80/100/200 Hydraulic Hole Punching Tool,Hydraulic Hole Punching Tool,200 Hydraulic Hole Punching Tool,CH-80 Hydraulic Hole Punching Tool

Taizhou Juhuan Lifting Protection Equipment Co., Ltd , https://www.jsjoba.com