What is the installation size of the squatting pan?

Squatting pans are not strange to us, and we can often see them in life. When we chose to install, many people didn't know how to proceed because they didn't understand it. The installation size of the squatting pan is one of the problems we all consider. Do you know how much it is? Today, I will share with you the size of the squatting pan and the installation method of the squatting pan.


蹲便器安装尺寸


What is the installation size of the squatting pan?


1, adult type squatting machine size: length 610mm, width 270mm


2, child-type squatting machine size: length 480mm, width 220mm


3. The distance from the center of the squatting water inlet to the finished wall should be no less than 60mm.


4. The thickness of the blank of any part of the squatting pan should be not less than 6mm.


5. The depth of the water seal of all squatting pans with integral trapping sanitary ceramics should not be less than 50mm.


蹲便器安装尺寸


What are the installation methods of the squatting pan?


1. When installing the squatting pan, please measure the product size first and reserve the mounting position according to the size. The installation position is filled with mixed mortar, and it is strictly forbidden to install with cement. Otherwise, the condensation of cement may break the toilet. Apply a layer of asphalt or butter to the installation surface of the squatting pan to protect the product from rupture.


2. The drain outlet of the squatting pan and the reserved port of the downpipe are coated with adhesive or glue. The drain outlet of the squatting pan is connected with the reserved outlet of the downpipe to correct the position of the squatting pan. Bricklaying fixed squatting pans, it is necessary to reserve the gap of gravel soil.


3. After the adhesive is dry, try to flush into the squatting pan to observe whether the interface is leaking. Then fill the gravel between the ground and the squatting pot. It is strictly forbidden to fill the concrete. Close the gap with bricks. After the cement mortar is applied outside the brick

On the tile.


4. The flushing valve installed with the squatting pan is divided into: a hand-operated flush valve and a pedal-type flush valve. The water tank installed with the squatting pan, the height of the water tank installation is 1.8 meters from the toilet water circle, and the water pressure requirement is 0.14-0.55Mpa.

In order to effectively achieve a good flushing effect.


5. For any squatting pan with water storage bay, the sewerage should not be set up again, otherwise it will affect the flushing function. If you do not have a squatting pan in the water storage bay, you should set up a water storage bay on the pipe for the function of odor.


When we choose the squatting pan, we need to understand the installation method, and its size is also a problem that we all need to consider. The above is the size of the squatting installation that Xiaobian introduced for you today and the installation method of the squatting pan is over here. For more information, please continue to pay attention to the decoration home.

Carbide Milling Cutter

Carbide Milling Cutter,Straight Milling Cutters,Hard Alloy Milling Cutters,Tct Woodworking Cutting Knife

Guofu Technology Group Co., Ltd , https://www.guofutools.com