Terminal tension tester operating methods and maintenance

The terminal tension tester is specially designed for detecting the pull-off force of various wire harness terminals. It can be equipped with a digital display, a dial push-pull force gauge and a special fixture. The instrument has a small device, accurate operation, high measurement accuracy, easy installation of test pieces, and simple operation. Such characteristics, is the ideal equipment for harness manufacturers to ensure product quality. Then the next Xiaobian came to talk about how to use and maintain the terminal tension tester.
Terminal tension tester general test operation process:
1. Place the wire portion of one end of each wire harness terminal into the jaw of the left jig, and rotate the handle to clamp the wire portion (the wire harness terminal has been pressed).
2. Place the other end of the wire harness terminal into the jaws of the right jig. Rotate the handle to keep the end of the wire harness terminal stuck in the middle.
3. Using the M4 Allen key, align the center of the left fixture with the center of the right fixture.
4. If you use the HF series (digital explicit push-pull gauge) push-pull timing, turn on the power until the LCD display shows zero.
5. If installing push-pull timing of NK series (point-type push-pull force meter), press the switch button to return the finger to zero position.
6. Rotate the handle of the fuselage so that the left clamp moves to the left and the right clamp can hold the terminals.
Daily maintenance and maintenance of terminal tension tester:
1, Do not overload, the rated load of this instrument is 500N.
2, pay attention to the daily maintenance work, keep the various parts of the instrument clean.
3, when the machine fails, please contact the factory or sales point (do not disassemble, repair).
Terminal Force Tester Picture
Product recommendation: high and low temperature pull machine single column pull machine terminal pull machine metal pull machine universal pull machine spring pull machine button pull machine motor torque meter scaffold fastener torque wrench digital pressure tester wire tension tester

Drywall Screws

Plasterboard Screws,Sheetrock Screws,Gypsum Board Screw,Plasterboard Anchor Fixings

NINGBO YWC IMP. & EXP. CO.,LTD , https://www.nbywc-fastener.com