Durability

The wear resistance of tiles can generally be divided into five degrees. Once poor wear resistance, it is suitable for walls or human activities. The second degree of wear resistance is slightly better, and can be used in bathrooms and bedrooms, where people's friction to the ground is relatively small. The third degree of wear resistance is moderate, and can be laid in the living room, kitchen, etc., where people often walk. Four degrees higher wear resistance, can be used for entrance, corridor, or public use. The fifth degree has high wear resistance and is generally used in public places such as stations and airports, and there is no need for families to use it.

Water absorption

Because of the different functions of wall tiles and floor tiles, the requirements for water absorption are also different. Wall tiles can be selected for water-absorbing tiles, while floors have to be selected for water-absorbing tiles. In the living room, it is best to choose low-absorbent floor tiles because the living room floor is prone to dirt due to frequent activities. The lower the water absorption of the tiles, the higher the degree of densification, so that the dense brick holes will not easily absorb moisture and dirt, which is more convenient for cleaning. In the bathroom, you should also choose low-absorbent floor tiles, because such tiles are not only easy to clean, but will not be deformed due to excessive expansion.

Judging the water absorption of tiles can be done in this way. Drop a drop of water on the back of the sample tile to see if the water will be absorbed quickly. Tiles that do not absorb water or have a slow water absorption have lower water absorption.

hardness

When you buy tiles, you can use the method of tapping debris to check the hardness of the tiles. Hold the corner of the tile with your finger and allow the tile to hang naturally. Then gently tap the middle and bottom of the tile with your finger. If the sound is crisp, with a metallic sound, this indicates that the tile is of good quality and high in hardness. Such tiles are very tough and not easily broken, and they are not prone to cracking and deformation after being laid. If the percussive sound is husky, dull and turbid, it is likely that there is a crack inside the tile and the hardness is not high.

Exterior

From the appearance can also identify the quality of the tiles. The first is color difference. There should be no difference in shades of color between tiles of the same variety. You can put together a few pieces of tiles and look closely in the light. The tiles of a good tile are basically the same in color, and not in shades. Followed by the size, the same species of tiles should be the same side length, and the length of the opposite side of the same tile should also be the same. It also depends on whether the surface of the tile has uneven glazes, dropped corners, and pinholes. It is also possible to scratch the surface of the tiles with a hard object, and if scratches appear, the tiles are insufficiently glazing. Such tiles, when the glaze on their surface is polished, are easily filthy and very difficult to clean.

Tiles Optional Bathroom Room Living Room Wall Color Bedroom Kitchen Tiles

Bidet Sprayer

Bidet Sprayer,Toilet Bidet Sprayer,Stainless Steel Bidet Kits,Non-Electric Toilet Bidet Sprayer

kaiping aida sanitary ware technology co.,ltd , https://www.kpfaucets.com