1, ground treatment

Before the waterproof treatment, be sure to level the ground first. If the ground is not flat or the effect is not good, it may cause cracking and leakage due to uneven thickness of the waterproof coating. Floor joints, corners, pipes and other joints should be made of highly flexible and flexible waterproof paint, because the joint between the wall and the floor of the bathroom will be displaced most easily.

2, wall treatment

The wall surface should be made of waterproof coating of about 30cm high to prevent the water from seeping into the wall. If the bathroom has a shower room, it should be waterproof to 180cm. If there is a bathtub, the wall adjacent to the bathtub should be waterproof. The height is 30cm.

3, after the waterproof layer is done, it is necessary to leave a certain amount of time, so that the waterproof layer and the building are better integrated, and then the protective layer is laid on the waterproof layer in the paving brick. During the construction process, it is sloppy. Try to protect the waterproof layer as much as possible.

4. Waterproofing is a concealed project. Subsequent construction may also damage the waterproof layer. If the floor tiles have been laid, do not smash the floor tiles. Use professional seam waterproofing materials to block all the gaps and make them waterproof. . The same applies to the waterproofing project after the waterproof layer of the bathroom.

5. Waterproofing is a systematic project, and the causes and treatment methods of each place are different. Material is the foundation, construction is the key, and follow-up service is guaranteed.

Bathroom waterproof building materials

First, poured reinforced concrete floor.

Second, 1:3 cement mortar to find the slope layer, the thinnest part 20MM thick, slope to the floor drain, once smoothed.

Third, Leibang Shi acrylic polymer cement-based waterproofing paste.

Fourth, 30MM thick dry cement mortar bonding layer.  

Fuel Level Sensor

The fuel level sensor is fully developed and manufactured by GAMICOS for universal fuel management – monitoring fuel level, controlling fuel consumption and preventing fuel theft. According to different case, we can offer Reed Switch Fuel Level Sensor, mechnical fuel level gauge, Capacitive Fuel Level Sensor and ultrasonic fuel level sensors etc.

Fuel Level Sensor,Fuel Level Gauge,Fuel Tank Level Sensor, Diesel Level Sensor, Mechnical Fuel Level Gauge, Capacitive Fuel Level Sensor

Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com