Haoyu graphics card radiator with diamond-like carbon film
Chisels are classified in different shapes according to different uses:
Flat chisel: the cutting edge is flat, the cutting edge and the chisel body is an inverted isosceles triangle, mainly used for opening square holes or repairing some square holes;
Chisel,chisel for hammer drill,chisel for stone,impact chisel,stone chisel Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com
This technology developed by Haoyu is mainly combined with plasma-enhanced CVD technology. The surface of the heatsink fins of the graphics card is covered with a diamond-like carbon (DLC) film, which can quickly transfer heat from the core and memory. It also protects the heat sink from moisture and acid corrosion and oxidation.
Diamond-like carbon film is a new type of material that has emerged in recent years. It has excellent optical penetration, chemical resistance and friction, especially high thermal conductivity, which is four times faster than copper.
According to Yunyu, the DLC film can reduce the thermal resistance of the heat sink to about 0.05, and the heat sink temperature will also decrease by about 5 °C. For example, the GeForce 9500GT can be lowered from 88 °C to 85 °C.
However, Haoyu has not decided which graphics card products to use this new technology, only to say that it will be considered according to the actual situation. .jpg)
.jpg)
Oblique chisel: the blade is 45° Angle, the blade and chisel body is an inverted right triangle, mainly used for repair, most of the dead corners for carving and carving repair;
Gouge: the cutting edge is semicircular, mainly used for opening circular or elliptical holes;
U type chisel: the cutting edge is U-shaped, which is rare now, mainly used for carving and repair;