The key can be handed and the decoration can begin. Each apartment has its own decoration family has its own little ninety-nine, how much money in the pocket, looking for what kind of interior decoration company, like what style, what equipment is installed comfortably, how much money to stay in the soft-furnishings ... The same apartment decoration room type, different The families have different budgets, and the overall build plan naturally varies. When you are setting an abacus for your home's decoration, how does the neighbor's home calculate? The same house, how does the final effect of the different effects? In this issue, we interviewed the same 100-square-meter, two-bedroom and two-room Ms. Xue, tea and pudding, and three uncle Zhuang’s homes to see how they used different budgets to put out three different homes.

The comfort of equipment can be equipped with the apartment decoration can also be very high

"In the past, when the apartment was renovated, what comfortable equipment came from! The water treatment was warm and awkward. I didn't even know what it was. Now, after decades, the conditions in the home have greatly improved with the past. My son is abroad. There are many days of life, and in this renovation, many places are installed in accordance with his opinions. He is influenced by the living habits abroad, so we have installed the water treatment, floor heating and central air conditioning."

People abroad have high requirements for water quality. After all, water is used every day for drinking and it is important for health. Therefore, we planned to start water treatment at the very beginning. We do not understand specific plans. We are looking for water treatment companies and let them configure them for us.

This is my family's pre-filter, installed in my home's total water inlet, do not underestimate such a small thing, you can remove the water in the sand, rust, large particles of impurities, filtered water through it to the home Water pipes all over the country have a certain protective effect on pipelines and wading equipment. No electricity, no supplies.

The installation master is backwashing and turning the knob below, the sewage with impurities can be drained.

Install a central water purifier behind the prefilter. The role of the central water purifier is to remove heavy metals, residual chlorine, harmful substances, different colors and odors, and purify the water quality of the whole house. In the past, the tap water had always had the smell of bleach, and it was very turbid. After installing the pre-filter and the central water purifier, the problem was completely solved.

The water softener was installed behind the central water purifier. We chose a small-sized model and placed it in the cabinet. The installation master specially arranged the pipeline for us. The toilet and shower passed the softener. The kitchen water did not pass through the water softener. . The living room and master bedroom are warmed, and the water softener prevents fouling of the pipes and protects the floor. After a hard day's work, go home to shower with purified and softened water bubbles, and people feel relaxed and comfortable both physically and mentally.

Our apartment renovation is a new community, water quality is relatively poor, so the water out of the central water purifier can still not drink directly, to directly drink the water or to match a kitchen water purifier. We took advantage of the promotion, bought a water purifier, and usually opened the tap there is clean water to drink. Health and convenience. A full set of water treatment spent 17,000, a little more than the budget.

"The whole house is equipped with plumbing to turn off the heat for a long time."

Originally winter intended to use air conditioning to control the temperature, but his son insisted on warm water. When I went abroad to see my son last year, the warmth gave me leave. It was winter. The house he lived in was very large, but it was very warm. Just think about it. The house is small and the comfort cannot be ignored. My husband and I are getting older. After all, plumbing is much healthier and more comfortable.

My home is full house plumbing, think about anyway, the boiler also bought, not so bad point of the pipe, so the guest restaurant, bedroom, bathroom are equipped with plumbing, spent a total of 18,000. Each zone has a thermostat that does not waste heat. Plumbing is a little good, that is, you can turn off the heat for a long time, and the foot is particularly warm and comfortable on the floor. The old people in Shanghai apartment renovation can try it out.

"Mixed out air conditioners are also available with benefits"

Lifting air-conditioning, my family started to have a little conflict. My husband and I both said that the central dining room was going to use the central air-conditioning. I was firmly opposed to it. A hundred-square-meter house, and what central air-conditioning should be installed, is simply a waste of money! My son said that my thinking is too old, and that the central air conditioning is not only beautiful and comfortable, but also has grades. We have been unable to contend for a single result. In the end, our friend recommended Panasonic and finally resolved our conflicts.

This central air-conditioning is good to have the characteristics of the hidden installation of the central air-conditioning and the hair-drying effect, but it is a drag, and the decoration of the apartment is quite suitable for installing the restaurant. I figured it out. The restaurant had a total of about 10,000, and it was a couple of 3,000 blocks cheaper than the split machine. So it settled. This central air-conditioning is one of the most satisfying places I have installed, and it is quite cost-effective. Two rooms took a split machine and spent a total of more than 6,000 pieces.

A few small experiences:

1. Everyone has to pay attention to the details when they are renovating central air conditioners in apartments. They are pulling pipes. Pipes take shortcuts as much as possible, not only saving electricity but also reducing the risk of leaks and making repairs easy.

2. Solid wood flooring is generally not suitable for floor heating. Instead, radiators can be used instead, but water mixers must be installed.

2. If the budget for apartment decoration is adequate, then it will be equipped with a water softener. It does have a protective effect on the floor heating system, and it is particularly comfortable to wash your hands with soft water.

Apartment decoration

Ejector Pins & Sleeves

The use of the thimble and the barrel is called the thimble and barrel assembly, which is one of the plastic mold accessories. The thimble and barrel are the thimble in the barrel and needle assembly. The thimble cylinder is a metal rod used for ejecting the glue product. The product is continuously ejected in the mold running at high speed, and the telescopic movement of the cylinder is used for wear or processing.

1. In plastic molds, separating the product from the mold is also the most commonly used;
2. Carbide thimble, such as tungsten steel thimble, etc., can be used to pass longer and thinner holes;
3. The thimble is also called the top. It is a conical metal round rod that is mounted on a lathe or grinder to support the workpiece and rotate the workpiece around it, but it is completely different from the thimble of plastic mold accessories;
4. Plastic mold thimble can also be used in the mold, it can play a role of stabilization, and is called as inserting pin.
The types of plastic mold thimble are: flat thimble, dome needle, support pin, standard thimble, non-standard thimble, etc.
Plastic mold thimble materials are SKH51, SKD61, SKD11, 65Mn, etc.
SKH51 thimble has better toughness than SKD61; SKD61 thimble can withstand high temperature of 1600 ℃. After nitriding treatment of SKD61 thimble surface, it can improve the wear resistance of thimble very well. 65Mn thimble is brittle and easy to break because of its poor quality Some plastic molds are no longer assembled and the thimble made of 65Mn is used.
The standard models of lathe and grinder thimble:
The standard for fixed thimble is GB / T9204.1-1988, and the standard for rotary thimble is JB / T3580-1998.

Ejector Pins And Sleeves

Ejector Sleeves,Ejector Sleeve Din,Custom Ejector Pin,Ejector Pins And Sleeves

Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com