Decoration tiles are one of the main building materials that are indispensable. Living room floors, kitchens, bathrooms, balconies and other spaces often use it. When tiling, the construction process is stressful, and good craftsmanship can not only make you The smart and beautiful interior space will save you money and worry. Here we come to take a look at the contents of paving tiles to introduce it!

Cautions need to be vigilant

Before looking at the notices on paving tiles, let's take a look at what is the process of paving slabs : Cleaning the grass-roots floor → Cement mortar leveling → Calibration height, bombing → Selection of materials → Wet plate moistening → Installation of standard blocks → Paving Cement mortar → paving stones → pouring → cleaning → maintenance delivery. Once you know the process, let's find out what you need to pay special attention to when paving the floor!

First, pay attention to paving tiles - soaking water

The most important step in tile paving considerations is the fact that the tiles have many fine gaps regardless of their quality. When used, they have a certain degree of water absorption. If they are not treated with water, or if the water is not sufficient, If the tiles are directly applied, the tiles will absorb the water in the cement, which will cause gaps in the connecting part between the tile and the cement, making the adhesion insecure, causing problems such as empty drums and tiles falling off. When the tile is soaked in water, it must be completely infiltrated into the water, and the time is usually about 30 minutes.

Second, pay attention to paving tiles - grassroots

A good start is half of success. In the process of laying bricks, grass-roots cleaning is the beginning of paving. The grassroots treatment should be clean, and the unevenness must first be leveled and repaired. The grass-roots level should be clean and there should be no mortar, especially lime-ash mortar, oil stains, etc., and wet the ground with water. When paving stones and porcelain tiles, standard blocks must be placed. The standard blocks should be placed at the cross intersection and installed diagonally.

 

Third, pay attention to paving tiles - adhesives

It is also very important for the adhesion of the tiles to be noticed in the attention of the tiles. This not only saves the decoration cost, but also makes the tiles more firm and beautiful. Must choose the correct cement label and the mixing proportion of cement sand. The improper mixing ratio of cement sand or the high cement label will cause the cracking and detachment of the tile. The higher the proportion of cement, the stronger the bonding force of the tile, but the high proportion of cement mixing , It will lead to an increase in the coefficient of expansion of the cement mortar, easily causing the tiles to be cracked after being tiled. Generally, the ratio of the tile adhesive agent is 1:3 for the wall tile, 1:2 for the floor tile, and 32.5 for the cement.

Fourth, pay attention to paving tiles - crevices

For tile production, slight deviations in straight angle, length, straightness, etc. may exist in the same batch of products of the same model. In the construction process, there will be a certain degree of error for tile tiles that are more or less the same. The most important point is that the tiles will be affected by the phenomenon of thermal expansion and contraction, so be sure to leave enough gaps in the tiles to allow it to have a certain shrink space, so that after a long time use will not be the appearance of the tiles Influencing, from the above, it is also important for tile gaps to be aware of tile-laying considerations.

V. Paving tiles notes - cleaning

One of the important points in tile paving considerations is the timely cleaning of the tiles. When the tiles are tiled, the excess adhesive material in the gaps in the tiles is removed in a timely manner, and the tile is wiped off with wet cotton cloth. Surface stains, do not wait until the adhesive material is dry before cleaning and wiping, this will not only not clean the tile surface, but also on the tile surface glazed layer damage, affect its use and aesthetics, in the bonding material After solidification, the joints can be brushed with white cement, gypsum plaster, and color paste.

Acceptance criteria should pay attention

1. Pay attention to whether tiles need to be parqueted or laid in a uniform direction.

2. The leveling of the floor tiles shall be checked with a 2-meter level ruler, the error shall not exceed 0.5 mm, the height difference between adjacent tiles shall not exceed 0.5 mm, and the gap straightness shall be 3 mm. When the floor tiles are laid, other types of work shall not be polluted and shall not be trampled. After the tiles are finished, they will be sewn 24 hours after the completion of the floor tiles, cleaned, and cured.

3, floor tile hollowing phenomenon is controlled within 3%, the empty channel on the main channel must be rework, 3% single refers to a single piece of empty corners, the whole block must not empty.

  

4. After the floor tiles are finished, check whether the flatness has any errors, empty drums, color differences, etc., then cover and protect them with cardboard or plywood, old carpets, etc. The space between the boards must be tightly taped with a wide paper tape to prevent the entry of sundries.

5, under normal circumstances, the level of floor tiles allowed to have an error of 2 mm, floor tiles must be the same gap, the brick and brick should be flat (allow 0.3 mm error), kitchen, bathroom wall tiles in addition to brick and brick The corners should be flat, but also need to be level (allowing 1mm error) and verticality (allowing 2mm error) to be achieved. Bathrooms and balconies need to be floor drained, and the slope should be put first. If there is no special reason, there must be no Water.

Xiaobian Summary: Some information about the floor tile considerations, I have no further knowledge of the precautions floor tile it? If you still don't understand, welcome to leave a message and we will answer your questions as soon as possible! If you need to know more about the tile, please continue to pay attention to Xiaobian, pay attention to this site information.

Tile Floor Tiles Top Ten Living Room Floor Tiles

Product Structure:

Inner layer: Extruded with nylon or other modified polymer material.

Intermediate Sheath: Enhanced layer with aramid fiber, steel wire or other high-strength material by composite molding. 

Outer layer: The factory traditional color is black, however, customer preference color can be provided with or without UV protection. 

Main Uses:

Transmission of industrial methanol and corrosion inhibitor of gas field. 

Temperature resistance range: -45°C~95°C

Specifications:
1. ISO 9001/ API Q1 / ISO14001 / OHSAS 18001 Certificate
2. Large stocks Timely delivery
3. Professional
4. Good after-sale service

Reinforced Flexible Composite Hose includes:

Water Injection Pipe Series

Gas Pipe Series

Oil Injection Pipe Series

Alcohol Injection Pipe Series

Offshore Pipe Series

Alcohol Injection Pipe Series

Alcohol Injection Pipe Series,Alcohol Injection Pipe,Professional Alcohol Injection Pipe

HEBEI BAOSHI SPECIAL FLEXIBLE RUBBER CHEMICAL INDUSTRY CO., LTD. , https://www.hbbaoshihose.com